[Heathkit] Help D104 update of problem

[Jim Shorney]

On Mon, 12 Feb 2007 15:51:57 EST, OTAKEBI at aol.com wrote:

>If so I should wire the mic plug for my SB-401 as follows.
>White = audio
>Shield = ground
>Red and Black (connected together) = PTT


Black is "PTT return" (ground) in Relay mode, and "RX Enable" in Electronic
mode.  Assuming that mic follows what used to be the standard color code. 
Connect black and shield together at the connector end of the mic cable and
put the switch in "R".



-- 
Jim Shorney      -->.<--Put complaints in this box
jshorney (at) inebraska.com
Ham Radio NU0C
Lincoln, NE, USA
EN10ps
http://incolor.inetnebr.com/jshorney/