[Heathkit] Paint gun for boat anchors

[RBethman]

I have to second this comment!

I use a Badger "hobby" compressor along with a Paasche VL Airbrush set.

I've redone Hallicrafters SX-101, HT-32, R-46, and R-42 cabinets.

I did NOT have to resort to dragging out my contractor's compressor and 
spray setup.  I use a water separator on the output of the compressor. 
When the desiccant STARTS to turn pink at all, I pop it in the oven at 
90 Deg C and bake it back to blue.

I've been airbrushing for a couple of decades.  Used to do T-Shirts for 
pocket change.

Bob - N0DGN

> Uh, no, Carh, sorry but you are wrong! 
> 
> I just told you I redid an entire 32V2 cabinet using a
> Badger "model" spray system and canned air. Results
> were fantastic!
> 
> I believe its equivalent is the one they were talking
> about for 10$ on Harbor Freight. You can use a
> compressor. I borrowed mine from a friend later on but
> the canned air sufficed. And it costs much less than
> $50. I don't know why it didn't work for you but it
> sure did for me. Got lots of complements on that
> restored 32V2. I'll be glad to do it again the same
> way I did the last time!
> 
> Cal. N6KYR/8