[Heathkit] Part search help needed.

[Tom NØJMY - AAR7FV]

I don't know how many watts it is rated for, but the following is 
available  from Vibraworld.com : "1 Meg Audio Taper with DPDT push-pull 
switch, 7mm bushing."  It's a "chassis mount" made by "Alpha" and is 
used primarily in gee-tar amps.  Look here about half-way down the page: 
http://www.vibroworld.com/parts/tech14.html . They list for $7.75, but 
V.W. claims they give you a discount and there is no minimum order.

I've never patronized this vendor so can't speak for their quality of 
any overall sales experience, but I'm looking at them real hard for some 
possible HW-16 mods.

If you use them, pse let us know how it goes,
Tom

Kenneth G. Gordon wrote:
> I need at least 5 ea 1 meg, audio-taper pot with an attached SPST 
> push-pull switch to replace the AF gain pot in the HW/SB transceivers.
>
> I know these are available from places like Mouser, but have not been 
> able to figure out how to search for the combination.
>
> These are to enable a "Fast/Slow AGC" function in the HW/SB 
> transceivers so the rigs can be used more effectively for digital modes, 
> including CW.
>
> I am hoping that someone here can suggest a way to find these.
>
> Ken Gordon W7EKB
> _______________________________________________
> List Administrator: Duane Fischer, W8DBF        
> ** For Assistance: dfischer at usol.com **         
> $$ See the vintage area on the HCI web site - http://www.w9wze.org $$ 
> Heathkit mailing list
> Heathkit at mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/heathkit
>
>