[Heathkit] AT-1 Thanks

[bfetters at aol.com]

Thanks to all of you who helped me troubleshoot my old AT-1.   Turns out that I needed to replace several caps, which was done for a nominal amount.
 
In addition, when testing the unit, I was using a crystal or two that was far enough off the 3.5 MHz and 7.0 MHz fequencies (into a dummy load) for the tank circuit to handle it, and thus had very poor output.  
 
The AT-1 is alive and well.  Now I have another one on the shelf to work on.