[Heathkit] SA-2060 Inductor Counter

[Richard Crane]

Mark,
   
  I checked my manual for the SA-2060 and found that the front panel label is a stick-on for the copper-clad front panel. Once stuck to the front panel it is virtually permenant.
   
  If the front panel label is attached to the front panel a tad high, the counter numbers will appear low in the turns window. I remember on my unit even with perfect panel label alignment the centering of the turns numbers in the window was marginal at best. You might check to see if this condition exists in your 2060.
   
  -rich WB5KKY