[Heathkit] HV reading on a SB 200 or 201

[jeremy-ca]

2400V on a decent 120/240V line. A lower reading is usually due to the 4.7M 
multiplier resistors changing value as they are being run well above their 
500V ratings

Carl
KM1H
----- Original Message ----- 
From: "Richard Franzson" <Franzsrf at umdnj.edu>
To: <Heathkit at mailman.qth.net>
Sent: Tuesday, December 19, 2006 3:29 PM
Subject: [Heathkit] HV reading on a SB 200 or 201


> What is the normal HV reading for a sb 220 or 201 in the idle mode?
>
> Thanks,
> Rich KE2VM
> _______________________________________________
> List Administrator: Duane Fischer, W8DBF
> ** For Assistance: dfischer at usol.com **
> $$ See the vintage area on the HCI web site - http://www.w9wze.org $$
> Heathkit mailing list
> Heathkit at mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/heathkit
>