[Heathkit] Update on SB-401 SB-303 No Receive No SSB Output

[Greg Mijal]

If CW is ok and SSB is not, then take a look at the interconnect cabling. 
That's where the problem is.
Greg
WA7LYO
in sunny Feenix


> [Original Message]
> From: <OTAKEBI at aol.com>
> To: <heathkit at mailman.qth.net>
> Date: 8/27/2006 7:32:03 PM
> Subject: [Heathkit] Update on SB-401 SB-303 No Receive No SSB Output
>
> Just noticed that I get full output on CW but, no output on SSB lower or  
> upper.
> I have my scope hooked up to rig and noticed this.
> I will be opening up rig in the morning and will check tubes first.
> But, I think a problem has developed in the relay.
> I guess I will be checking each wire to see if when I had it off to clean

> something came off a lug.
> If anyone has had this problem let me know since I will look at that
first  
> and save some time.
> Dan/N4VET
> _______________________________________________
> List Administrator: Duane Fischer, W8DBF        
> ** For Assistance: dfischer at usol.com **         
> $$ See the vintage area on the HCI web site - http://www.w9wze.org $$ 
> Heathkit mailing list
> Heathkit at mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/heathkit