[Heathkit] DX-60

[WF2U]

Check the switch wiring - The ground and the wire from the 6146 cathode must
be reversed.

73, Meir WF2U
Landrum, SC

> -----Original Message-----
> From: heathkit-bounces at mailman.qth.net
> [mailto:heathkit-bounces at mailman.qth.net]On Behalf Of BFetters at aol.com
> Sent: Saturday, August 12, 2006 4:34 PM
> To: heathkit at mailman.qth.net
> Subject: [Heathkit] DX-60
>
>
> Have DX-60 that puts out solid CW signal on all bands. Picked it
> up at a flea
> market.  Lots of grid drive, although it drops a bit when the key is held
> down.  Problem: when the meter is in the plate position, it is
> pinned in a
> negative manner.  Still lots of output, but a "negative" plate reading.
> Thoughts/inputs?
>
> Thanks.
>
> Buck W0RST
>