[Heathkit] RE:sb-101 problem solved, SB-401

Edward B Richards zuu6k at juno.com
Sun Apr 23 15:34:11 EDT 2006


Yes, it is quite common. I replace them with a 10 turn pot facing up.
Makes it much easier to achieve a deep null.

73, Ed Richards K6UUZ
Simi Valley, Ca 93065
Home of the Air Force 1 pavilion

On Sun, 23 Apr 2006 13:51:23 EDT KHeck73 at aol.com writes:
>  
> In a message dated 4/23/2006 10:49:29 A.M. Eastern Daylight Time,  
> k1mcn- at verizon.net writes:
> 
> It turns  out that the balance pot was bad after all. it had an open 
> side. I 
> replaced it  and now I can balance the carrier and fully null it 
> with the 
> varable  cap.
> Thanks for all the  advice.
> Matt
> K1MCN
> 
> 
> 
> I think this may also be a common problem with the SB-401. I have 
> one  that 
> had the carrier null pot replaced by RTO before I obtained it. The  
> replacement 
> sits on top of the board facing upwards, instead of  underneath.
>  
> -Karl.
> _______________________________________________
> List Administrator: Duane Fischer, W8DBF        
> ** For Assistance: dfischer at usol.com **         
> $$ See the vintage area on the HCI web site - http://www.w9wze.org 
> $$ 
> Heathkit mailing list
> Heathkit at mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/heathkit
> 
> 


More information about the Heathkit mailing list