[Heathkit] INFO NEEDED

[Glen Zook]

You need to put in a relay to key the SB-200 when the
TS-520S goes to transmit.  A relay with a 12 VDC coil
(less than $10 from Radio Shack) using a "wall wort"
that is keyed by the transceiver.  Use the contacts
from the relay to key the SB-200.  The keying voltage
from the SB-200 is too high to be safely handled by
the built in capabilities of the TS-520S.

Glen, K9STH

--- Ray <atp1986 at mchsi.com> wrote:

I have a SB-200 to connect to a Kenwood TS-520S. Have
all the schematics for both the SB-200 & 520.
 
Is there any other additional information I need to
know to prevent harm or damage to either the SB-200 or
520. 

Glen, K9STH

Web sites

http://home.comcast.net/~k9sth
http://home.comcast.net/~zcomco

__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com