[Heathkit] SB-220

[Fern Rivard]

Hi Ernie:
    I have used an ameritron qsk board model EBS-1/EBS-1H in tried it 
into a Drake L-75 hf amp which uses single 3-500Z tube and it made a 
great difference in the idling current from 80/100 ma down to between 
0(zero) and 10 ma so a saving of a lot of watts (200 to 240) with that 
board installed in it. I now plan to install the same board into a Henry 
3K Classic II export which uses a single 3CX1200A7 and draws close to 
200 ma on when keyed up so that's approximately 800 watts going into 
waste. I much recommend their board.
    73 from Fern   VE7GZ



----- Original Message ----- 
From: "Ernie Piche N1SW" <n1sw at cox.net>
To: <heathkit at mailman.qth.net>
Sent: Thursday, September 01, 2005 3:02 PM
Subject: [Heathkit] SB-220


> Is anyone using QSK with the SB-220.  If so what are you using.  How 
> about the Amertorn QSK device.  Does it work and is it worth the 
> money?
>
> Thanks
> Ernie
> N1SW
>
> _______________________________________________
> List Administrator: Duane Fischer, W8DBF        ** For Assistance: 
> dfischer at usol.com **         $$ See the vintage area on the HCI web 
> site - http://www.w9wze.org $$ Heathkit mailing list
> Heathkit at mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/heathkit
>
>
> -- 
> No virus found in this incoming message.
> Checked by AVG Anti-Virus.
> Version: 7.0.344 / Virus Database: 267.10.18/87 - Release Date: 
> 9/1/2005
>
>