[Heathkit] HW-101 info neded

[Bwana Bob]

Murray:

You need to connect an oscilloscope or VTVM with RF probe across the 
dummy load. This will give you enough sensitivity to null the carrier 
with the mic gain fully CCW. The manual should say that at the beginning 
of the transmitter alignment instructions.  Another way to do it is to 
use a separate receiver with its antenna wire draped near the dummy 
load. Just null the carrier by watching the S meter on the receiver.

			73,

			Bob WB2VUF

Murray Grandy wrote:

> Can someone help me with this please. I am doing xmitter align as per manual. Page 123, top of second column. "Turn mic level fully counterclockwise" and adjust carrier null for min rf. There is no rf with mic control in this position. What am I missing, or misreading. I have two manuals and instructions are the same. Is this a stupid question?
> Murray
> *************************************************
> _______________________________________________
> List Administrator: Duane Fischer, W8DBF        
> ** For Assistance: dfischer at usol.com **         
> $$ See the vintage area on the HCI web site - http://www.w9wze.org $$ 
> Heathkit mailing list
> Heathkit at mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/heathkit
>