[Heathkit] Transformer data

[Wayne Hoskins]

Looking from the front of the transmitter, the mod transformer is in 
the center beside to the final cage; and the back row of iron are, from 
left to right, the plate transformer, HV filter choke, and power 
transformer.

Specs from the schematic (assuming 115 volt primary):
HV xfmr = 1800 VCT, 400 ma
HV choke = 5.5 hy, 400 ma
Low Voltage xfmr =
	5V, 4A
	600VCT, 175 ma
	240VCT, 200 ma (p/o 600V winding)
	5V, 2A
	6.3V, 3.5A
	6.3V, 9A

Hope this helps.

73, Wayne AD5ST



On Aug 16, 2005, at 14:26, windy10605 at juno.com wrote:

> On the Heathkit TX-1 Apache there are 3 transformers and a choke. I
> assume they are:  ........the smaller transformer is the modulation
> transformer, there is a low voltage and filament transformer, and a 
> high
> voltage transformer. What are the voltage/current levels out of the two
> power transformers ?
>
> 73 Kees K5BCQ
> _______________________________________________
> List Administrator: Duane Fischer, W8DBF
> ** For Assistance: dfischer at usol.com **
> $$ See the vintage area on the HCI web site - http://www.w9wze.org $$
> Heathkit mailing list
> Heathkit at mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/heathkit
>