[Heathkit] Heath HP-23 question

[Bwana Bob]

Rich:

The SB-101, SB102, HW-101 and HW-100 all use the 350 V position.

The low voltage 250 V position was for the single banders (HW-12(A), 22, 
32 and the HW-18- MARS/CAP rigs.

The older HP-23 had the low/high voltage taps, but you had to select the 
desired voltage with an internal wire.

				73,

				Bob WB2VUF

Richard Franzson wrote:

> I have a HP 23 with a toggle switch for LV-off-HV. On the SB 101 which
> setting do I use? And on a SB-102 which setting do I use?
> Also,  can someone please tell me why the newer HP 23 power supply has
> an option for voltage levels. And the old version HP 23 did not.
> 
> Tnx,
> Rich KE2VM
> _______________________________________________
> List Administrator: Duane Fischer, W8DBF        
> ** For Assistance: dfischer at usol.com **         
> $$ See the vintage area on the HCI web site - http://www.w9wze.org $$ 
> Heathkit mailing list
> Heathkit at mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/heathkit
>