[Heathkit] sb-221 meter

Mon, 26 Jan 2004 23:13:13 -0500

That switch frequently goes bad in the HV position. Mine barely works.

----- Original Message ----- 
From: "paul" <[email protected]>
To: <[email protected]>
Sent: Monday, January 26, 2004 11:07 PM
Subject: Fw: [Heathkit] sb-221 meter

> forgot to mention. output is to full factory specs.  paul w8jn
>
> ----- Original Message -----
> From: "paul" <[email protected]>
> To: <[email protected]>
> Sent: Monday, January 26, 2004 10:51 PM
> Subject: [Heathkit] sb-221 meter
>
>
> ok hams, here is one to think about. i have a sb-221. good
condition. high
> voltage meter reading not working. it will read relative power and
grid ma.
> i jumpered in a new in box meter with the same results, so the
problem is
> not the meter. i have a new harbach meter diode board and new tippin
face
> and lots of paint on the back so its possible that the mounted stuff
is not
> making ground contact.. i cleaned the 3 position wafer switch . no
luck. any
> thoughts? tnx in advance paul w8jn
>
> --- StripMime Report -- processed MIME parts ---
> multipart/alternative
>   text/plain (text body -- kept)
>   text/html
> The reason this message is shown is because the post was in HTML
> or had an attachment.  Attachments are not allowed.  To learn how
> to post in Plain-Text go to: http://www.expita.com/nomime.html  ---
> _______________________________________________
> List Administrator: Duane Fischer, W8DBF
> ** For Assistance: [email protected] **
> $$ See the vintage area on the HCI web site - http://www.w9wze.org
$$
> Heathkit mailing list
> [email protected]
> http://mailman.qth.net/mailman/listinfo/heathkit
>
> _______________________________________________
> List Administrator: Duane Fischer, W8DBF
> ** For Assistance: [email protected] **
> $$ See the vintage area on the HCI web site - http://www.w9wze.org
$$
> Heathkit mailing list
> [email protected]
> http://mailman.qth.net/mailman/listinfo/heathkit
>