[Heathkit] Crystals for sale
Kim Herron
[email protected]
Wed, 18 Feb 2004 14:07:03 -0500
Good day everyone!!
I have a bunch of crystals that need to find a home and some use.
Please take a look, and see what you can use.
1. 18 FT-243 (12) CR-1 (4) CR-4 (2) crystals that are odd freqs.
Good for grinding you own or replacement parts $6.00 for the lot
shipped.
2. Ham band crystals. Most are FT-243 holders or HC-6 with large pins
like FT-243.
All have been tested in an oscillator with freq counter and work.
A few are HC-6 holders and are noted. $3.00 ea plus shipping
(postage) or
$30.00 for the lot plus postage (cheap).
1 3710 1 7170 1 1932
1 3733 1 7153 1 1843.75
1 3737 1 7175 1 14000. HC-6
1 3703 1 7181
1 3716 1 7168
1 3732` 1 7180
1 3725 1 7258 HC-6
1 3720 1 7045
3. Heath SB series and HX-10 crystals. A full set of crystals for an
SB 100/101 (or HW)
SB300/301 or SB400/401. These have NOT been soldered into
anything. They came out of a
scrap SB401. The USB/LSB/CW crystals are there. In addition is a
set of crystals for a Marauder
transmitter. Heres the list in case you don't know. One each on
the freq's.
They have all been tested in an oscillator so I know that they
work. $40.00 for the lot shipped.
38.395, 37.395, 36.395, 12.395, 29.895, 22.895, 37.895, 15.895,
37.395, 3393.6, 3396.4, 3395.4
4010, 3.4, 13.990, 21.5, 10.4, 4990.
4. New in the box 100 kHz calibrator crystals. These were from Heath
and are the crystals that were used
in the SB/HW series radios. They are the tall HC-6 holder and can
also be used in Hammarlund,
Collins, some Hallicrafters, or anything else that uses that style
calibrator crystal. Make your own calibrator
with a SN7400 series IC if you'd like or use a 6AU6 and copy the
circuit that Heath used.
$10.00 a piece with the postage.
Thanks!!
Kim Herron W8ZV
1-616-677-3706