[Heathkit] HA-14 & HP-24 Connectors

[B Riches]

For the HV connector I have used chassis mount pl259 type sockets and use rg59 coax with pl259 connectors.  Have to drill a bit but is a safe connector.  You could also use neon sign cable with the pl259's.

For the 8 pin male plugs - www.newarkinone.com  
plug    42F034    $ 3.45
cap    42F019        $3.95

73,

Bill Riches, WA2DVU
Cape May, NJ
  ----- Original Message ----- 
  From: Tim Billingsley KD5CKP 
  To: heathkit at mailman.qth.net 
  Sent: Saturday, December 04, 2004 6:44 PM
  Subject: [Heathkit] HA-14 & HP-24 Connectors


  Does anyone know of a supplier of the High Voltage connectors and appropriate wire for the HV connection between the HP-24 and the HA-14?

  Also I am in need of a round 8 pin plug that plugs into a 8 pin socket on the HP-24 that looks a lot like a tube socket. If anyone is familiar with this setup and can direct me toward the connectors or complete cables I would be truly grateful.

  Tim KD5CKP
  _______________________________________________
  List Administrator: Duane Fischer, W8DBF        
  ** For Assistance: dfischer at usol.com **         
  $$ See the vintage area on the HCI web site - http://www.w9wze.org $$ 
  Heathkit mailing list
  Heathkit at mailman.qth.net
  http://mailman.qth.net/mailman/listinfo/heathkit