[Heathkit] Rack mount DX-100B?

[Edward B Richards]

I have never done that but if the rack is fully inclosed there should be
no problem. Note: The hole spacing for the DX-100B is not standard. You
will probably have to drill and tap new holes in the rack. Good luck.

73, Ed Richards K6UUZ


On Fri, 20 Aug 2004 17:14:49 +1000 Damien Vale <lcval1 at netcon.net.au>
writes:
> Thinking of mounting my DX-100B in a 19" rack to match some other 
> heavy 
> metal. To fit it will have to be removed from its metal case. Anyone 
> had 
> any problems running a 100B out of its metal case eg. RFI/TVI etc? I 
> plan 
> to use metal covers on the sides of the rack, and ground the whole 
> thing 
> including each item.
> 
> Damien VK3RX
> 
> _______________________________________________
> List Administrator: Duane Fischer, W8DBF        
> ** For Assistance: dfischer at usol.com **         
> $$ See the vintage area on the HCI web site - http://www.w9wze.org 
> $$ 
> Heathkit mailing list
> Heathkit at mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/heathkit
>