[Heathkit] HP23A

Thu, 17 Jul 2003 12:59:49 -0700

If I remember right, You have to change the transformer tap to 250 volts
if is set for #300 volts. Good luck.

Ed Richards K6UUZ

On Thu, 17 Jul 2003 09:31:20 -0400 "Rischpater, Evan"
<[email protected]> writes:
> I have used the HP23A power supply on my HW32. The trick is to match 
> the
> output of the HP23A with the 8 pin socket on the HW32.
> Take a piece of paper and on the left side write the numbers 1 
> through 11 in
> a column. On the right side write the numbers 1 through 8. On the 
> left side
> write down the output on each of the pins as listed on the 11 pin 
> socket of
> the HP23A. On the right side similarly write down the input 
> requirements of
> each of the 8 pins on the HW32. You can now make up an adapter with 
> an 11
> pin plug on one end and a 8 pin socket on the other by matching the 
> inputs
> and outputs.
> 
> Good Luck
> 
> Evan
> AK2Y
> 
> 
> _______________________________________________
> List Administrator: Duane Fischer, W8DBF        
> ** For Assistance: [email protected] **         
> $$ See the vintage area on the HCI web site - http://www.w9wze.org 
> $$ 
> Heathkit mailing list
> [email protected]
> http://mailman.qth.net/mailman/listinfo/heathkit
> 