[Heathkit] Re: Spiral Follower

Wed, 05 Feb 2003 23:36:41 -0500

The one in my SB-401, the tip broke off, so what I did is 
drill a small hole into the center of the main piece were 
the tip was and inserted a small screw, then cut off the
screw head. It still working after 3 years.
Tom NE7X...

> 
> 
> Hi All,
>  might try asking at your local hobby shop if they know of any one with a small lathe, should be easy to spin them out...
> Kevin
> wa6fwf
> 
> ----- Original Message ----- 
> From: "Tom in N Texas" <[email protected]>
> To: <[email protected]>
> Sent: Wednesday, February 05, 2003 7:10 AM
> Subject: [Heathkit] Re: Spiral Follower
> 
> 
> > Norm, if you find a source for these, please let me know. I have an SB-101.
> > 
> > Thanks,
> > Tom Dulin
> > ========================
> > At 03:01 AM 2/5/03 , you wrote:
> > >Message: 1
> > >Date: Tue, 04 Feb 2003 08:32:24 -0600
> > >From: Norm Wolfe <[email protected]>
> > >To: [email protected]
> > >Subject: [Heathkit] Nylon Sprial follower
> > >
> > >Help:
> > >
> > >I am desperate for the little white nylon sprial follower which attaches
> > >to the "Dial pointer drive arm".  I am dead in the water right now.  If
> > >someone can help and has one please let me know by e-mail or call
> > >collect at (920) 568-9018.
> > >
> > >Thanks
> > >
> > >Norm
> > >KL7IVK
> > 
> > Tom in N Texas, KC5INU,  EM12jk, RARA 025, QRPp-I 353, NETXQRP  33, QCWA 
> > 31587, [email protected],
> >   Hallicrafters SX-71, S-38, S-38D, National NC-300, Johnson Viking Ranger,
> > Knight TR106, Heath SB-101, "Sixer", IO-10, V-7 VTVM, etc., etc.
> > 