[Heathkit] Re: [Amps] CLEAN SB-220 Schematic available as PDF

[Peter]

Tom

If you need more space we will place the drawing on our site and you add one a
link to the page

peter

Tom Hammond N�SS wrote:

> For what little it may be worth...
>
> Many of us either have an SB-220, or we wind up working on someone else's.
>
> It's been my experience that the fold-out schematic of the SB-220 really
> takes a beating over the years, and usually winds up looking pretty 'ratty'.
>
> I have completely REDRAWN the SB-220 schematic, using CorelDraw v9, and
> have produced two files (600DPI Acrobat Reader v4, PDF formatted) which are
> now available for DOWNLOAD:
>
>    http://home.earthlink.net/~n0ss/sb-220_schematic_11x14.pdf
>
> and
>
>    http://home.earthlink.net/~n0ss/sb-220_schematic_2-pg.pdf
>
> The first file is a single 11" x 14" page and may be difficult to print for
> some users.
>
> The second file was broken into two halves which can be printed on standard
> 8-1/2" x 11" paper and then either left as-is, or the 2nd page can be
> trimmed and taped/pasted onto the right edge of the 1st page to make a
> full-sized schematic.
>
> PLEASE NOTE: My earthlink web site limits me to a specific amount of
> download volume each month. If that volume is exceeded my web site will
> either be suspended until the beginning of the following month OR I will be
> charged additional for the excess volume. NEITHER of these options are
> acceptable. As a result, I ask that you be use some restraint in your
> selection of the files to be downloaded, and that you choose ONE of the two
> files which will best suit your requirements. I suspect a fairly heavy
> volume of downloaders right as first, and I will be monitoring the daily
> volume. If it becomes excessive, I will remove the schematics from the site
> until the following month. So please be courteous, not only to me, but to
> others who might also wish to have a copy. I do not intend to remove the
> files unless volume gets to be excessive.
>
> I do have the drawings available in CorelDraw (CDR) format if anyone would
> like to have them. If you do wish to obtain the CDR files, please drop me a
> note and ask. Be sure to include a note with regard to the version of
> CorelDraw you will be using.
>
> Finally, if you find any drawing errors, PLEASE LET ME KNOW A.S.A.P. so the
> drawing can be corrected.
>
> 73,
>
> Tom Hammond   N0SS
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps

--
Internet DX-cluster telnet://213.10.48.91
DX-cluster info http://www.pi4cc.nl/dxcluster