[HCRA] N1MM logging software and Field Day

[Matt Wilhelm (W1MSW)]

New to N1MM logger? Not to worry. N1MM from a field day operators standpoint
is very simple. The band captains and I will have everything configured for
you. All you have to do is enter callsigns and exchanges and hit enter! Here
are a couple hot-keys that will make your life easier

.

Ctrl+O = Set operator call

Whenever a new operator sits down to operate. It would be great if they
would use CTRL+O and enter their callsign. That way your callsign will be
next to every QSO you log. Excellent for bragging rights later on. Just make
sure that the next operator who sits down also use ctrl+o or the previous
callsign will still be listed. If you leave your station but there's no one
to take over and you don't want to leave your callsign, just click CTRL+O
and enter W1NY

SPACE or TAB = Move between logging fields

All you have to do is enter the callsign and click Space or Tab to move to
the next field. And when you're done entering the info...

ENTER = Log it

Once you have all the data entered (Callsign and exchange) hit enter to log
it!

Ctrl+W or Alt+W = Wipe entry fields



Let's say you screwed up when typing in a callsign and don't want to screw
around with the backspace key or you lost the station and can't log the
contact Ctrl+W will erase everything and you can start over with blank
fields.

Just a few things to stick in the back of your mind and I'll try to
make up cheat sheets to put next to stations. Or just holler that you're
having problems until someone comes to help!

Getting closer!

Matt - W1MSW