[HCRA] Yaesu VX6 programming cable

[Jim - KK1W]

Eric,

Looks like building one requires some work:
http://ad7gd.net/vx6/datacable.html

Here's an eBay listing for under $10:
http://cgi.ebay.com/USB-Radio-Programming-Cable-Yaesu-VX-6-VX-7-VX-170-/3802
11184305

I see others around for $25 or so. Do some research on the eBay one and if
it seems OK (probably is) I would go for it.

Good luck,

Jim

> -----Original Message-----
> From: hcra-bounces at mailman.qth.net [mailto:hcra-bounces at mailman.qth.net]
> On Behalf Of Eric Richardson
> Sent: Wednesday, March 24, 2010 5:18 PM
> To: HCRA
> Subject: [HCRA] Yaesu VX6 programming cable
> 
> ______________________________________________
> -------Hampden County Radio Association-------
> -----------e-mail list (reflector)-------------
> ______________________________________________
> Hello everyone!
> 
> I am looking for an inexpensive way to obtain a programming cable for my
> VX6. I would like it to have a USB interface, and i'm not against to
> making my own cable.
> 
> I am planning on using the VX-6 Commander software for it.
> 
> Any help would be appreciated!
> 
> Thanks!
> 
> Eric
> KB1JVI
> 
> 
> ______________________________________________________________
> HCRA mailing list
> Home: http://mailman.qth.net/mailman/listinfo/hcra
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:HCRA at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html