[HCARC] Connecting Yaesu FT-450AT For RTTY/PSK31

[Harvey N. Vordenbaum]

The simplest way would be to use a SignaLink USB interface along with any
one of numerous soundcard digital radio programs.  This gets away from
having to use COM ports from your computer, and it uses the power from the
USB connection thus eliminating the need for another wall wart power supply.
Many new computers don't have COM ports anymore.  This unit also takes the
place of using the computer's sound card which are sometimes somewhat
compromised.
Be sure to get any ready made interface cables to connect the SignaLink to
your model radio.
( I thought you were getting an Elecraft? )
K5hv

-----Original Message-----
From: hcarc-bounces at mailman.qth.net [mailto:hcarc-bounces at mailman.qth.net]
On Behalf Of Gary and Arlene Johnson
Sent: Saturday, May 25, 2013 5:51 PM
To: hcarc at mailman.qth.net
Subject: [HCARC] Connecting Yaesu FT-450AT For RTTY/PSK31

What will be needed to connect my Yaesu FT-450AT for running RTTY/PSK31??
Will I need something like a RigBlaster, or is there an easier way to get it
connected??  What would be the BEST , Easiest and most reliable way to
connect it??

Gary J
N5BAA
HCARC Secretary 2013
______________________________________________________________
HCARC mailing list
Home: http://mailman.qth.net/mailman/listinfo/hcarc
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:HCARC at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html