[HCARC] Which Ground?

[Charley & Peggy Robinson]

Gary,
I would connect to the newly driven stake, especially if it and several 
others are going to be your station ground.  Time to put a piece of pipe 
through the wall and wire your ground stakes to a ground bus attached to 
the table that the rig is going to sit on. I'm using a 2" diameter, 
thick wall,  copper pipe clamped to the back of the desk my equipment in 
on/in for a ground bus.  All the equipment grounds are wired to the pipe 
and the pipe is wired to the ground stakes.  The electrical service 
ground is at the other end of the house, the only interconnection 
between the service ground and the station ground is literally through 
the ground.

73,

Charley, af5ao