From mcinsand at gmail.com  Sat Dec  1 18:31:11 2018
From: mcinsand at gmail.com (Stan McIntosh)
Date: Sat, 1 Dec 2018 18:31:11 -0500
Subject: [HBR] HBR-16 price range?
In-Reply-To: <5uAX1z0040r0seX01uAXHB@charter.net>
References: <CAKVLtWPGp78t71rcX-WX0RzpTTo6u7MT9E_ZEMVE-2ojB_H43w@mail.gmail.com>
	<5uAX1z0040r0seX01uAXHB@charter.net>
Message-ID: <CAKVLtWNkrNMnYp65-+H84=HEvSQEmbYBZvdG4HYca0Vc0ONzZg@mail.gmail.com>

Welp, the seller and I worked out a price that seems to make us both happy,
and the receiver should be here soon.  I'm looking forward to joining the
club.  The HBR has coils for 80 meters, which is most important to me, and
I'm looking forward to adding more sets, as well as the related
challenges.  Here's where things might get interesting, since I've also
been slowly working on assembling a 3D printer.  Am I understanding
correctly that the coils fit octal sockets?  If so, would printing a
cylinder with a base to slide into
https://tubedepot.com/products/8-pin-octal-tube-base-only?gclid=Cj0KCQiA_4jgBRDhARIsADezXciB8Zfp7Fm-IPA1uKV3-ZwvSLlmQrketUyqseqfDc5757kgrBdVK2YaAiCfEALw_wcB
be an option?  Thingverse has coil form files with winding guides, and some
friends that print have nudged me towards the basics with adjusting
dimensions with Blender.

73
Stan
KD4BTH

From smithab11 at comcast.net  Sat Dec  1 18:41:22 2018
From: smithab11 at comcast.net (B. Smith)
Date: Sat, 1 Dec 2018 18:41:22 -0500
Subject: [HBR] HBR-16 price range?
In-Reply-To: <CAKVLtWNkrNMnYp65-+H84=HEvSQEmbYBZvdG4HYca0Vc0ONzZg@mail.gmail.com>
References: <CAKVLtWPGp78t71rcX-WX0RzpTTo6u7MT9E_ZEMVE-2ojB_H43w@mail.gmail.com>
	<5uAX1z0040r0seX01uAXHB@charter.net>
	<CAKVLtWNkrNMnYp65-+H84=HEvSQEmbYBZvdG4HYca0Vc0ONzZg@mail.gmail.com>
Message-ID: <df9cd2f3-603f-e366-a745-853c8b10fbd0@comcast.net>

A discussion of several different coil forms can be found here:
http://k4che.com/HBR/RF%20Mixer%20Osc%20Band%20Coils%20Page%201.htm

73 k4che

On 12/1/2018 6:31 PM, Stan McIntosh wrote:
> Welp, the seller and I worked out a price that seems to make us both happy,
> and the receiver should be here soon.  I'm looking forward to joining the
> club.  The HBR has coils for 80 meters, which is most important to me, and
> I'm looking forward to adding more sets, as well as the related
> challenges.  Here's where things might get interesting, since I've also
> been slowly working on assembling a 3D printer.  Am I understanding
> correctly that the coils fit octal sockets?  If so, would printing a
> cylinder with a base to slide into
> https://tubedepot.com/products/8-pin-octal-tube-base-only?gclid=Cj0KCQiA_4jgBRDhARIsADezXciB8Zfp7Fm-IPA1uKV3-ZwvSLlmQrketUyqseqfDc5757kgrBdVK2YaAiCfEALw_wcB
> be an option?  Thingverse has coil form files with winding guides, and some
> friends that print have nudged me towards the basics with adjusting
> dimensions with Blender.
>
> 73
> Stan
> KD4BTH
> ______________________________________________________________
> HBR mailing list
> Home: http://mailman.qth.net/mailman/listinfo/hbr
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:HBR at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>


From leecraner at aol.com  Sun Dec  2 16:43:40 2018
From: leecraner at aol.com (Lee Craner)
Date: Sun, 2 Dec 2018 21:43:40 +0000 (UTC)
Subject: [HBR] HBR-16 price range?
References: <853296169.529778.1543787020901.ref@mail.yahoo.com>
Message-ID: <853296169.529778.1543787020901@mail.yahoo.com>

Stan,

The coil sockets will typically be 5 or 6 pin, depending upon the original builder's choice.

73
Lee WB6SSW
 
 
 
-----Original Message-----
From: Stan McIntosh <mcinsand at gmail.com>
To: HBR Receiver List <hbr at mailman.qth.net>
Sent: Sat, Dec 1, 2018 8:55 pm
Subject: Re: [HBR] HBR-16 price range?

Welp, the seller and I worked out a price that seems to make us both happy,
and the receiver should be here soon.? I'm looking forward to joining the
club.? The HBR has coils for 80 meters, which is most important to me, and
I'm looking forward to adding more sets, as well as the related
challenges.? Here's where things might get interesting, since I've also
been slowly working on assembling a 3D printer.? Am I understanding
correctly that the coils fit octal sockets?? If so, would printing a
cylinder with a base to slide into
https://tubedepot.com/products/8-pin-octal-tube-base-only?gclid=Cj0KCQiA_4jgBRDhARIsADezXciB8Zfp7Fm-IPA1uKV3-ZwvSLlmQrketUyqseqfDc5757kgrBdVK2YaAiCfEALw_wcB
be an option?? Thingverse has coil form files with winding guides, and some
friends that print have nudged me towards the basics with adjusting
dimensions with Blender.

73
Stan
KD4BTH
______________________________________________________________
HBR mailing list
Home: http://mailman.qth.net/mailman/listinfo/hbr
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:HBR at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

