[HBR] 6BJ6 <=> Hickok 539B

[hopperdhh at aol.com]

The settings for the 6BJ6 are the same as for the 6BH6 except the MIN. MUT. COND. should be 2400 instead of 2150.  This info is for a Model 539C, not a 539B.  The 6BJ6 is similar to the 6BH6 except it is remote cutoff instead of sharp cutoff.


For reference the settings for the 6BH6 are:


6.3 ET-1562-7 0.8 --- P4 C 2150


If these settings agree with the 539B chart, then the only change needed is 2400.


Regards,


Dan K9WEK




-----Original Message-----
From: B. Smith <smithab11 at comcast.net>
To: HBR Receiver List <hbr at mailman.qth.net>
Sent: Mon, Aug 20, 2018 1:40 pm
Subject: Re: [HBR] 6BJ6 <=> Hickok 539B

It is listed in the Consolidated Tube Data base.Do a Google on Hickok Consolidated Tube data etc.k4cheOn 8/20/2018 12:33 PM, Vern VanZ via HBR wrote:> Greetings to the group.> Does anyone out there have the settings info to test a 6BJ6/A using the Hickok 539B tube tester?  None of my charts even list a 6BJ6...> Thanks and 73,> Vern - N7GTBKennewick, WA>> Sent from Yahoo Mail on Android> ______________________________________________________________> HBR mailing list> Home: http://mailman.qth.net/mailman/listinfo/hbr> Help: http://mailman.qth.net/mmfaq.htm> Post: mailto:HBR at mailman.qth.net>> This list hosted by: http://www.qsl.net> Please help support this email list: http://www.qsl.net/donate.html-- ______________________________________________________________HBR mailing listHome: http://mailman.qth.net/mailman/listinfo/hbrHelp: http://mailman.qth.net/mmfaq.htmPost: mailto:HBR at mailman.qth.netThis list hosted by: http://www.qsl.netPlease help support this email list: http://www.qsl.net/donate.html