[HBR] HBR Chassis Kit

[Martin Marris]

I have ordered LH Heeger "omni" chassis several times.

The quality is excellent. It is also quite useful sometimes to be able to
mount components on a top plate for instance, prior to screwing on the
sides.

You can see some photos of one of my Heeger-chassis projects here:

http://tinyurl.com/khckgdu

and here:

http://tinyurl.com/lrpkoya

Please note however that I used a relatively small chassis in this case (10"
x 5" x 3"). The aluminum is relatively thin. I don't know how this sort of
construction would hold up for a large project such as an HBR -- perhaps it
would work best if you used two or three smaller chassis bolted together,
and you might have to add angle brackets for extra stiffness.

73 from Martin, KB1WSY

======================

-----Original Message-----
From: HBR [mailto:hbr-bounces at mailman.qth.net] On Behalf Of B. Smith
Sent: Thursday, December 03, 2015 13:50
To: HBR Receiver List
Subject: [HBR] HBR Chassis Kit

Several months ago someone mentioned  LM Heeger (link below) as a source of
chassis "kits".

Q. Has anyone ordered  a  chassis from this company and if so do you have
any comments on quality good or bad?


http://lmbheeger.com/omnichassiskit.aspx

73
breck k4che
http://k4che.com/HBR/HBR%20page%201.htm
______________________________________________________________
HBR mailing list
Home: http://mailman.qth.net/mailman/listinfo/hbr
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:HBR at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html