From whitebear1122 at comcast.net  Fri Apr 12 09:59:26 2013
From: whitebear1122 at comcast.net (whitebear1122 at comcast.net)
Date: Fri, 12 Apr 2013 13:59:26 +0000 (UTC)
Subject: [HBR] HBR-11 Template
In-Reply-To: <2071f.6ec3cabd.3cf6c286@aol.com>
Message-ID: <1537553755.740763.1365775166878.JavaMail.root@sz0139a.emeryville.ca.mail.comcast.net>

Does anyone have an HBR-11 chassis ?template that they can share with me?? I have the front panel and front chassis laid out, now I'm laying out the chassis top.? Thanks. 73, Scott WA9WFA 


From LeeCraner at aol.com  Fri Apr 12 16:45:00 2013
From: LeeCraner at aol.com (LeeCraner at aol.com)
Date: Fri, 12 Apr 2013 16:45:00 -0400 (EDT)
Subject: [HBR] HBR-11 Template
Message-ID: <1167d9.3ca80453.3e99cc4b@aol.com>

Scott:
 
Sorry, I forgot to respond to this question in your earlier email.   No, I 
don't have the layout.  Drop a note to Jay Helms, though.  He  may have one. 
 His email address is _cerrogordo at iscweb.com_ 
(mailto:cerrogordo at iscweb.com) .
 
73
Lee WB6SSW
 
 
In a message dated 4/12/2013 12:59:40 P.M. Pacific Daylight Time,  
whitebear1122 at comcast.net writes:

Does  anyone have an HBR-11 chassis  template that they can share with  me? 
 I have the front panel and front chassis laid out, now I'm laying  out the 
chassis top.  Thanks. 73, Scott WA9WFA  

______________________________________________________________
HBR  mailing list
Home: http://mailman.qth.net/mailman/listinfo/hbr
Help:  http://mailman.qth.net/mmfaq.htm
Post:  mailto:HBR at mailman.qth.net

This list hosted by:  http://www.qsl.net
Please help support this email list:  http://www.qsl.net/donate.html

From whitebear1122 at comcast.net  Tue Apr 16 09:37:14 2013
From: whitebear1122 at comcast.net (whitebear1122 at comcast.net)
Date: Tue, 16 Apr 2013 13:37:14 +0000 (UTC)
Subject: [HBR] HBR-11 Template
In-Reply-To: <1167d9.3ca80453.3e99cc4b@aol.com>
Message-ID: <882146673.880679.1366119434782.JavaMail.root@sz0139a.emeryville.ca.mail.comcast.net>

Thanks Lee for the tip, 73, Scott WA9WFA 

----- Original Message -----
From: LeeCraner at aol.com 
To: hbr at mailman.qth.net 
Sent: Friday, April 12, 2013 3:45:00 PM 
Subject: Re: [HBR] HBR-11 Template 

Scott: 
? 
Sorry, I forgot to respond to this question in your earlier email. ? No, I 
don't have the layout. ?Drop a note to Jay Helms, though. ?He ?may have one. 
?His email address is _cerrogordo at iscweb.com_ 
(mailto:cerrogordo at iscweb.com) . 
? 
73 
Lee WB6SSW 
? 
? 
In a message dated 4/12/2013 12:59:40 P.M. Pacific Daylight Time, ? 
whitebear1122 at comcast.net writes: 

Does ?anyone have an HBR-11 chassis ?template that they can share with ?me? 
?I have the front panel and front chassis laid out, now I'm laying ?out the 
chassis top. ?Thanks. 73, Scott WA9WFA ? 

______________________________________________________________ 
HBR ?mailing list 
Home: http://mailman.qth.net/mailman/listinfo/hbr 
Help: ?http://mailman.qth.net/mmfaq.htm 
Post: ?mailto:HBR at mailman.qth.net 

This list hosted by: ?http://www.qsl.net 
Please help support this email list: ?http://www.qsl.net/donate.html 
______________________________________________________________ 
HBR mailing list 
Home: http://mailman.qth.net/mailman/listinfo/hbr 
Help: http://mailman.qth.net/mmfaq.htm 
Post: mailto:HBR at mailman.qth.net 

This list hosted by: http://www.qsl.net 
Please help support this email list: http://www.qsl.net/donate.html 

From w0ep at w0ep.us  Tue Apr 16 17:28:34 2013
From: w0ep at w0ep.us (Chris Howard w0ep)
Date: Tue, 16 Apr 2013 16:28:34 -0500
Subject: [HBR] Eddystone  898 dial drive
Message-ID: <516DC282.8040808@w0ep.us>


I am slowly accumulating parts for my HBR.

I just received an Eddystone 898 dial drive.

About the Eddystone drive, how do I mount the thing?
It comes with a piece of paper which says it is a template.
Do I have to drill holes in the vertical end pieces to
mount it? I'm not clear on how it goes.

Chris
w0ep


From glwells at yahoo.com  Tue Apr 16 20:05:14 2013
From: glwells at yahoo.com (Gary Wells)
Date: Tue, 16 Apr 2013 20:05:14 -0400
Subject: [HBR] Eddystone  898 dial drive
Message-ID: <7iaqoan8jkvpwh7xnglg8tp7.1366157008254@email.android.com>

There is a template which I think I have for my hbr-13. If you need it, let me know. It has the specific dimensions and hole placements.

Gary
WB9AYDChris Howard w0ep <w0ep at w0ep.us> wrote:
I am slowly accumulating parts for my HBR.

I just received an Eddystone 898 dial drive.

About the Eddystone drive, how do I mount the thing?
It comes with a piece of paper which says it is a template.
Do I have to drill holes in the vertical end pieces to
mount it? I'm not clear on how it goes.

Chris
w0ep

______________________________________________________________
HBR mailing list
Home: http://mailman.qth.net/mailman/listinfo/hbr
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:HBR at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

From whitebear1122 at comcast.net  Tue Apr 16 20:31:04 2013
From: whitebear1122 at comcast.net (Whitebear1122)
Date: Tue, 16 Apr 2013 19:31:04 -0500
Subject: [HBR] Eddystone  898 dial drive
In-Reply-To: <516DC282.8040808@w0ep.us>
References: <516DC282.8040808@w0ep.us>
Message-ID: <E849B4BE-B31E-45A9-AD26-C38B8E5BDAB1@comcast.net>

I have the template and 898 in front of me.  What you are looking at is a metal shipping bracket attached to each side.  Mine is green.  That comes off.  It's there solely to support the dial and string in the shipping box.

The template shows the cutout for the slide rule.  I had to look closely at first because it was confusing with those drill holes in the 4 corners of the inside radius.  What i surmise is that the holes are drilled first to give the soon to be opening a proper inside radius, then the builder cuts out the rest of the opening to the radiuses.  Did I describe it ok?  Then the outside frame mounts to the panel and ties into the slide rule using the 4 5/32" mounting screws.

I've been slowly collecting parts as well.  I have everything except a couple boxes of screws and nuts, have all the rest.

Email if you have questions.  


73, Scott WA9WFA
On Apr 16, 2013, at 4:28 PM, Chris Howard w0ep <w0ep at w0ep.us> wrote:

> 
> I am slowly accumulating parts for my HBR.
> 
> I just received an Eddystone 898 dial drive.
> 
> About the Eddystone drive, how do I mount the thing?
> It comes with a piece of paper which says it is a template.
> Do I have to drill holes in the vertical end pieces to
> mount it? I'm not clear on how it goes.
> 
> Chris
> w0ep
> 
> ______________________________________________________________
> HBR mailing list
> Home: http://mailman.qth.net/mailman/listinfo/hbr
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:HBR at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html


From w0ep at w0ep.us  Tue Apr 16 21:46:36 2013
From: w0ep at w0ep.us (Chris Howard w0ep)
Date: Tue, 16 Apr 2013 20:46:36 -0500
Subject: [HBR] Eddystone  898 dial drive
In-Reply-To: <E849B4BE-B31E-45A9-AD26-C38B8E5BDAB1@comcast.net>
References: <516DC282.8040808@w0ep.us>
	<E849B4BE-B31E-45A9-AD26-C38B8E5BDAB1@comcast.net>
Message-ID: <516DFEFC.80000@w0ep.us>


Yes, I understand completely what you are saying.
I will have to look at it awhile and contemplate.

I will also do some google searching to see if any
pictures are available from outside and from inside
with that dial.  I think that would help.

Chris




On 4/16/2013 7:31 PM, Whitebear1122 wrote:
> I have the template and 898 in front of me.  What you are looking at is a metal shipping bracket attached to each side.  Mine is green.  That comes off.  It's there solely to support the dial and string in the shipping box.
> 
> The template shows the cutout for the slide rule.  I had to look closely at first because it was confusing with those drill holes in the 4 corners of the inside radius.  What i surmise is that the holes are drilled first to give the soon to be opening a proper inside radius, then the builder cuts out the rest of the opening to the radiuses.  Did I describe it ok?  Then the outside frame mounts to the panel and ties into the slide rule using the 4 5/32" mounting screws.
> 
> I've been slowly collecting parts as well.  I have everything except a couple boxes of screws and nuts, have all the rest.
> 
> Email if you have questions.  
> 
> 
> 73, Scott WA9WFA
> On Apr 16, 2013, at 4:28 PM, Chris Howard w0ep <w0ep at w0ep.us> wrote:
> 
>>
>> I am slowly accumulating parts for my HBR.
>>
>> I just received an Eddystone 898 dial drive.
>>
>> About the Eddystone drive, how do I mount the thing?
>> It comes with a piece of paper which says it is a template.
>> Do I have to drill holes in the vertical end pieces to
>> mount it? I'm not clear on how it goes.
>>
>> Chris
>> w0ep
>>
>> ______________________________________________________________
>> HBR mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/hbr
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:HBR at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
> 
> ______________________________________________________________
> HBR mailing list
> Home: http://mailman.qth.net/mailman/listinfo/hbr
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:HBR at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> 
> 

From whitebear1122 at comcast.net  Tue Apr 16 22:04:21 2013
From: whitebear1122 at comcast.net (Whitebear1122)
Date: Tue, 16 Apr 2013 21:04:21 -0500
Subject: [HBR] Eddystone  898 dial drive
In-Reply-To: <516DFEFC.80000@w0ep.us>
References: <516DC282.8040808@w0ep.us>
	<E849B4BE-B31E-45A9-AD26-C38B8E5BDAB1@comcast.net>
	<516DFEFC.80000@w0ep.us>
Message-ID: <C838C508-6FBC-45DE-B326-90233F9A725C@comcast.net>

I can take a couple of pictures of the outside and inside of a mounted 898 on my HBR-13C.  I'll snap a few iPhone photos and email to you.  73, Scott WA9WFA
On Apr 16, 2013, at 8:46 PM, Chris Howard w0ep <w0ep at w0ep.us> wrote:

> 


From whitebear1122 at comcast.net  Tue Apr 16 22:15:26 2013
From: whitebear1122 at comcast.net (Whitebear1122)
Date: Tue, 16 Apr 2013 21:15:26 -0500
Subject: [HBR] Oops
In-Reply-To: <C838C508-6FBC-45DE-B326-90233F9A725C@comcast.net>
References: <516DC282.8040808@w0ep.us>
	<E849B4BE-B31E-45A9-AD26-C38B8E5BDAB1@comcast.net>
	<516DFEFC.80000@w0ep.us>
	<C838C508-6FBC-45DE-B326-90233F9A725C@comcast.net>
Message-ID: <D61D5446-11C8-410E-A69D-5FFC32116403@comcast.net>


I accidentally copied the HBR list with the three Eddystone photos for Chris W0EP.   My apologies to the moderator.  73, Scott WA9WFA  

From cerrogordo at iscweb.com  Wed Apr 17 01:20:20 2013
From: cerrogordo at iscweb.com (Jay Helms)
Date: Tue, 16 Apr 2013 22:20:20 -0700
Subject: [HBR] HBR-11 Template
In-Reply-To: <1167d9.3ca80453.3e99cc4b@aol.com>
References: <1167d9.3ca80453.3e99cc4b@aol.com>
Message-ID: <516E3114.5060607@iscweb.com>

Scott:

Ted Crosby to the best of my knowledge never created a template for his 
HBR 8/11 model, and I have never seen one created by someone else.

The first chassis template was created for the HBR-13 (his final design) 
by W3FX(SK) and is included in "Recollections".  I have chassis & panel 
templates for my  HBR-XX (an upgrade to the HBR-13) but they are for a 
full-size 19-in rack panel and associated chassis; the larger 
panel/chassis lets the receiver ventilate much better, and the interior 
runs about 10- degrees less than the little cabinet used by Ted.  
Frequency stability in all hot cathode designs is a function of heat 
rise from cold-start to "operating conditions".  Way-back-then everybody 
simply learned to live with it, but in our present digital world (where 
frequency stability is much easier to create) the aggravation of the 
warm-up frequency shift looks huge, but it is exactly what it was back 
in the '60s.

Sad to say, you are probably on your own on this issue.  I will send you 
my templates if you want to use them for ideas; just let me know.  Those 
in "Recollections" are for illustration only and are not at the needed 
1:1 scale.

73 de w6hht (since 1948)



On 4/12/2013 1:45 PM, LeeCraner at aol.com wrote:
> Scott:
>   
> Sorry, I forgot to respond to this question in your earlier email.   No, I
> don't have the layout.  Drop a note to Jay Helms, though.  He  may have one.
>   His email address is _cerrogordo at iscweb.com_
> (mailto:cerrogordo at iscweb.com) .
>   
> 73
> Lee WB6SSW
>   
>   
> In a message dated 4/12/2013 12:59:40 P.M. Pacific Daylight Time,
> whitebear1122 at comcast.net writes:
>
> Does  anyone have an HBR-11 chassis  template that they can share with  me?
>   I have the front panel and front chassis laid out, now I'm laying  out the
> chassis top.  Thanks. 73, Scott WA9WFA
>
> ______________________________________________________________
> HBR  mailing list
> Home: http://mailman.qth.net/mailman/listinfo/hbr
> Help:  http://mailman.qth.net/mmfaq.htm
> Post:  mailto:HBR at mailman.qth.net
>
> This list hosted by:  http://www.qsl.net
> Please help support this email list:  http://www.qsl.net/donate.html
> ______________________________________________________________
> HBR mailing list
> Home: http://mailman.qth.net/mailman/listinfo/hbr
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:HBR at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html


From glwells at yahoo.com  Wed Apr 17 12:15:52 2013
From: glwells at yahoo.com (Gary Wells)
Date: Wed, 17 Apr 2013 09:15:52 -0700 (PDT)
Subject: [HBR] HBR-11 Template
In-Reply-To: <1537553755.740763.1365775166878.JavaMail.root@sz0139a.emeryville.ca.mail.comcast.net>
References: <2071f.6ec3cabd.3cf6c286@aol.com>
	<1537553755.740763.1365775166878.JavaMail.root@sz0139a.emeryville.ca.mail.comcast.net>
Message-ID: <1366215352.94789.YahooMailNeo@web160506.mail.bf1.yahoo.com>

Scott, I do have the face and the chassis template for the HBR-13C if that helps in any way.

Gary
WB9AYD


________________________________
 From: "whitebear1122 at comcast.net" <whitebear1122 at comcast.net>
To: HBR Receiver List <hbr at mailman.qth.net> 
Sent: Friday, April 12, 2013 9:59 AM
Subject: [HBR] HBR-11 Template
 

Does anyone have an HBR-11 chassis ?template that they can share with me?? I have the front panel and front chassis laid out, now I'm laying out the chassis top.? Thanks. 73, Scott WA9WFA 

______________________________________________________________
HBR mailing list
Home: http://mailman.qth.net/mailman/listinfo/hbr
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:HBR at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

