[HBR] Drilling templates for the HBR 16

[Gary Wells]

James, If you decide to pursue the HBR-13C I do have the templates for the front panel and the chassis.

Gary
WB9AYD


________________________________
 From: James Lee <scriviamo at gmail.com>
To: hbr at mailman.qth.net 
Sent: Saturday, April 28, 2012 3:14 AM
Subject: [HBR] Drilling templates for the HBR 16
 
Your HBR group looks most interesting, and if enough information is
available,  I thought this might be a good candidate for my very last
receiver.  As in any undertaking, one has to start from the foundation and
go from there. So I'm wondering where or from whom I might be able to
obtain  the chassis and panel templates mentioned on your webpage.

Incidentally, there might be some problem on the registration page...I
can't get it to accept any input..I would like to join up.

Best regards,
James A. Lee  KF6K
______________________________________________________________
HBR mailing list
Home: http://mailman.qth.net/mailman/listinfo/hbr
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:HBR at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html