[HBR] Want to Buy Parts for an HBR

[Bob Deuel]

Hello Scott:

Hope someone comes through with the parts you desire.

If not, there is some light at the end of the tunnel within the next month 
or so.

I plan to launch on eBay a HBR-13C parts package that will include all the 
Miller coils you mentioned, the 1710kHz and 3500kHz crystals, a Miller 2102 
variable capacitor, all the tubes, resistors, capacitors, controls, 
transformers, knobs, tube sockets, jacks, etc. The package will also include 
an unused lift lid cabinet, main and sub chassis and the coveted 898 
Eddystone dial. The package will not have the plug-in coil components. It 
should be an excellent start for someone desiring to build the HBR-13C from 
scratch.

The launch date for this package will be sometime in the first part of 
April. I am choosing to put it on eBay so everybody who is interested in 
making the HBR-13C will have a fair and equal chance at obtaining the 
package of parts.

In the meantime, I will be listing a pair of NIB Miller #1731 1610kHz 
coupling coils on eBay. These coils were used in some of the earlier 
versions of the HBR. I understand that Miller manufactured these coils 
specifically for the HBR.

So if you do not have any luck obtaining the parts right now, you may want 
to watch eBay the first part of April.

73, Bob, k2glo






----- Original Message ----- 
From: <whitebear1122 at comcast.net>
To: "HBR Receiver List" <hbr at mailman.qth.net>
Sent: Wednesday, March 09, 2011 7:32 PM
Subject: [HBR] Want to Buy Parts for an HBR


> Want to buy some Miller IF transformers and parts for an HBR receiver 
> project. I'm looking to build an HBR-13 from scratch. Would you please 
> look in your junk box and help me out? I am looking forward to building my 
> own radio and would appreciate your help. I put out a similar post last 
> year around this time, had a parts HBR opportunity at the ready but I had 
> to back off because of a huge impending layoff at work that luckily 
> survived. I am ready to try again.
>
> (2) Miller 1730 1800 Kc IF transformer
> (4) Miller 1709 or 1710 10 KC IF transformer
> (1) Miller 1711 100 Kc BFO
>
> Junker or uncompleted HBR receiver for parts
> Eddystone slide rule dial
> National HRO gear box that is inline rather than right angle
> BC453 radio or ARC5 R23 190 Kc - 550 Kc receiver for a Q5'er project or to 
> get the 100 Kc IF's
>
> Thanks very much! 73, Scott WA9WFA
> ______________________________________________________________
> HBR mailing list
> Home: http://mailman.qth.net/mailman/listinfo/hbr
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:HBR at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html