[HBR] HBR Cabinet Idea : )

[William Wood]

Yes Grounded  BUT
I've taken a dozen of these babies
apart, and that ground is through a
rivet into the laminates that come
off with a chisel.  I've not measured
things out after that.  My goal was to
do three of these sans HV winding
and rewound for heavy duty low
voltage for a possible home build
welder...

Think I will put one or two aside and
do some measuring,  Can't remember
if there were two lugs in the HV side ???
Should be, but will have to look at them
again.  There's got to be some good
uses for these guys : )

73
Bill


On Mar 3, 2011, at 8:46 PM, Walt Hutchens wrote:

>> I've been eying my Panasonic microwaves' brushed stainless cabinet
>> for the past six months - perfect size for my rack mount NC-300...
>
> AND it comes with a free 1 kw high voltage transformer -- about 2200
> volts if I remember rightly.  With the slight disadvantage that one
> end of the HV winding is probably internally grounded.
>
> Walt
> KJ4KV
>
> ______________________________________________________________
> HBR mailing list
> Home: http://mailman.qth.net/mailman/listinfo/hbr
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:HBR at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html

If the grass is greener on the
other side of the fence, then
maybe you ain't watering
your own lawn...

Favorite Yahoo Groups...

http://groups.yahoo.com/group/OTR_and_Music/

http://groups.yahoo.com/group/Radio_Library/

And check out Tennessee Bill's site at:

http://otrshareandtrade.com/in.php?ID=12
and his personal site at:

http://TennesseeBillsOTR.com

Don't forget

http://www.archive.org/index.php

and one or two that maybe don't
want to be listed : )
And two dozen or more others
I won't tell you about unless you ask.