[HBR] Partially balanced mixer

[Paul Dulaff]

Does anyone have experience using the 6DJ8 as a first mixer in a reciever ?

Paul - WB2NMI


----- Original Message -----
From: Ian Wilson <ianmwilson73 at gmail.com>
To: HBR Receiver List <hbr at mailman.qth.net>
Sent: Tue, 13 Dec 2011 13:15:33 -0500 (EST)
Subject: Re: [HBR] Partially balanced mixer

I tried the 6DJ8, set up as follows:
  - 1k tail resistor
  - grid bias set for about 30V (i.e. about 15mA per triode)
  - B+ 150V or lower

This works pretty well also, with useful suppression when the
inputs are quite large (5v peak) (remember that my application is
primarily for a TX mixer).

Increasing B+ didn't increase the output noticeably.

73, ian K3IMW
______________________________________________________________
HBR mailing list
Home: http://mailman.qth.net/mailman/listinfo/hbr
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:HBR at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html