[HBR] Tuning Cap question???

[William Wood]

Greetings Earthlings
  found a cap that has three sections, and while I have not measured  
it, because of  pencil marking saying 140 on it, believe it to be 140  
pf.  While I can make it work VIA removing plates, or cap in series,  
the plates are pretty close together.  Which brings me to the next  
question in my series of queries.  What kind of voltages will this  
circuit generate?  I ask this because the thing might have come from  
a solid state goodie where the voltages might have been quite  
reduced.  I'm thinking of putting it in series with a 110 volt lamp  
and putting 110 on it and rotating it through it's range, but that  
might be only half the test I should do.  What's the next step in  
eliminating or proving this guy will do the job requested of it???
Thanks for your time guys
73
Bill



If the grass is greener on the
other side of the fence, then
maybe you ain't watering
your own lawn...

Favorite Yahoo Groups...

http://groups.yahoo.com/group/OTR_and_Music/

http://groups.yahoo.com/group/Radio_Library/

And check out Tennessee Bill's site at:

http://otrshareandtrade.com/in.php?ID=12
and his personal site at:

http://TennesseeBillsOTR.com

Don't forget

http://www.archive.org/index.php

and one or two that maybe don't
want to be listed : )
And two dozen or more others
I won't tell you about unless you ask.