[HBR] pots required HBR13.

[Lorne Barber]

Tom, thanks. I am only conecrned with the variable pots right now. No 
problem with the fixed resistances. Have lots of those.
7 3
Lorne
----- Original Message ----- 
From: "TC Dailey" <daileyservices at qwest.net>
To: "HBR Receiver List" <hbr at mailman.qth.net>
Sent: Saturday, January 31, 2009 10:10 PM
Subject: Re: [HBR] pots required HBR13.


>
> MOUSER electronics - www.mouser.com
>
> BUT - BE AWARE - FIXED RESISTOR physical sizes these days are MUCH SMALLER
> than they were "then".  2 watt resistors these days are the size that a 
> 1/2
> watt one used to be.  So, measure your distances, and order accordingly;
> i.e. if you have a 1w length to span, order 5w resistors to get them
> physically big enough.  Unless, of course, you're shrinking the chassis
> room, anyway.
>
> Tom
>
> ______________________________________________________________
> HBR mailing list
> Home: http://mailman.qth.net/mailman/listinfo/hbr
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:HBR at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html