[HBR] WTB-National type K 3 1/2in. dial

[Tom Smith]

A recent issue of "Electric Radio" sported Bruce Vaughn's regen receiver. My
attempt at it with a few modifications is listed below. Simple, fast
project, a real hoot to build and works very well.
www.hal-pc.org/~tsmith/regen_s1.jpg
www.hal-pc.org/~tsmith/regen_t.jpg
www.hal-pc.org/~tsmith/regen_c.jpg
www.hal-pc.org/~tsmith/regen_cr.jpg
www.hal-pc.org/~tsmith/regen_cf.jpg

Have a nice weekend,
Tom  N5AMA

----- Original Message -----
From: "R.J. Mattson" <rjmattson@hvi.net>
To: <hbr@mailman.qth.net>
Cc: <homebrew@mailman.qth.net>
Sent: Friday, November 15, 2002 9:43 AM
Subject: [HBR] WTB-National type K 3 1/2in. dial


> I have never found a type K Helm. When I built my 56 Novice special, I had
> to home-brew a type K with a unknown mfg.dial, two 1/4"bushings and rubber
> grommet. A 1/4" shaft with a tight fitting grommet rides on the perimeter
of
> the dial. Has been working great without slipping since I built the rcvr
in
> the 90s.
> Click below for pictures:
> http://www.hvinet.com/rjmattson/56novicespecial
> http://www.hvinet.com/rjmattson/56novicetop
> http://www.hvinet.com/rjmattson/56novicebac
> http://www.hvinet.com/rjmattson/56novicebot
> Bob Mattson...W2AMI
> WN2AMI  1962
> Highland NY
> http://www.qrz.com/callsign/w2ami
>
> ----- Original Message -----
> Subject: [HBR] WTB-National type K 3 1/2in. dial
>
>
> If you have one of the above and selling please state condition and
> price...or trade for whatever?
> Regards,
> Helm.  WB2ADT
>
> ************************************
>
>
> ************************************
> Visit the HBR Receiver Web Site with over 100 pictures of receivers and
> construction notes...... via http://www.qsl.net/k5bcq/
>
> Retrieve reflector archived data via
http://mailman.qth.net/mailman/listinfo/hbr
>
>