[HBQRP] SW 30 status report

[w9hzc at cox.net]

Over achiever !!
Dar...

> 
> From: "Joe Eisenberg" <radiodx at alltel.net>
> Date: 2005/11/16 Wed PM 07:30:31 EST> To: <dswenson at wearne.net>,  "HBQRP List" <hbqrp at mailman.qth.net>
> Subject: Re: [HBQRP] SW 30 status report
> 
> Hi all!
> At the risk of finding large objects thrown my way by those in the group 
> that have only started building the project, I finished the board on 
> Saturday evening.  I don't have the pots/cables kit, nor the enclosure yet, 
> so I haven't tested it yet.  I'll look to see how I can test it stage by 
> stage and I have found the Elmer 101 book incredibly detailed and 
> educational.  Not a single component is overlooked in detailed descriptions 
> of what it does!  Darrel, I will need to get a pots/cables kit ASAP if 
> possible.  Then, I think once mine is going, I can be of help to everyone 
> else working on this radio.
> 73, Joe KØNEB> ----- Original Message ----- 
> From: "Darrel Swenson" <dswenson at wearne.net>
> To: "HBQRP List" <hbqrp at mailman.qth.net>
> Sent: Tuesday, November 15, 2005 9:39 PM
> Subject: RE: [HBQRP] SW 30 status report
> 
> 
> > Hi All...
> >
> > Steve asks a good question... but I don't have a good answer, so I thought 
> > I
> > would poll the group.
> >
> > I'm not sure how may people are building along with me and the Elmer 101
> > material, and how may went ahead and just built their SW?0+.  I want to 
> > give
> > everyone who is building using the Elmer 101 material a chance to get 
> > caught
> > up.
> >
> > So... If you are building along, send me an e-mail and let me know how far
> > along you are and how fast you want to go.
> >
> > In the mean time, if you have finished the power supply section, you might
> > want to build an RF probe (if you don't have one.)  I used to refer people
> > to the ARRL handbook for a design.  My 1988 and 2000 handbooks have the
> > section, but my new 2005 one does not.  Here are some good internet 
> > sources
> > for a design.  (Or just type RF Probe into Google)
> >
> > http://www.norcalqrp.org/phprint.php
> > http://www.io.com/~n5fc/rfprobe2.htm
> > http://www.io.com/~n5fc/rfprobe1.htm
> >
> > I bought a NorCal RF Probe kit a couple of years ago someplace, and found 
> > it
> > when I was looking for SW+ cases, so am working on building it.
> >
> > 72... Darrel... K0AWB> >
> >
> > -----Original Message-----
> > From: hbqrp-bounces at mailman.qth.net
> > [mailto:hbqrp-bounces at mailman.qth.net]On Behalf Of ssellmeyer> > Sent: Tuesday, November 15, 2005 10:22 AM
> > To: Midwest Homebrewers Group
> > Subject: [HBQRP] SW 30 status report
> >
> > [snip]
> >
> > Anyway..........should we press on with the VFO next or wait until 
> > everyone
> > completes the power supply ???  I'm in no hurry as I want to learn how 
> > this
> > really works.
> >
> > Comments or suggestions ????
> >
> > Steve/WBØQQT> >
> > ______________________________________________________________
> > HBQRP mailing list
> > Home: http://mailman.qth.net/mailman/listinfo/hbqrp
> > Help: http://mailman.qth.net/mmmain.htm
> > Post: mailto:HBQRP at mailman.qth.net
> > 
> 
> 
> ______________________________________________________________
> HBQRP mailing list
> Home: http://mailman.qth.net/mailman/listinfo/hbqrp
> Help: http://mailman.qth.net/mmmain.htm
> Post: mailto:HBQRP at mailman.qth.net
>