[Hammarlund] HX-50 problem cropping up

[Bill Stewart]

Tnx Roy for the suggestion. I was thinking along a similar line
to draw up the wafers on Auto-Cad. It was a feature where selected
parts can be rotated a specified nr. of degrees. 
73 de Bill K4JYS

----- Original Message -----
From: "Roy Morgan" <k1lky68 at gmail.com>
To: "Bill Stewart" <cwopr at embarqmail.com>, "Hammarlund Mail List" <hammarlund at mailman.qth.net>
Cc: "Robert Sauvan" <rsauvan at beyondbb.com>
Sent: Tuesday, January 13, 2015 6:07:53 PM
Subject: Re: [Hammarlund] HX-50 problem cropping up


On Jan 13, 2015, at 5:29 PM, Bill Stewart <cwopr at embarqmail.com> wrote:

> ...I am also having a problem with the VOX
> system. …  ...I'm
> having trouble following the schem. thru all the wafer
> switches…

One technique for this problem (you are NOT the first!) is to make a copy of the schematic and with a thin marker or pencil, draw the switch in the position/mode that’s giving trouble.  Or make two copies and cut out the switch rotor(s) from one and tape them onto the other copy in the right position.

Than you have some chance of following the circuit,  Colored pencil or thin highlighter may help.  Pink for bias, red for B+, blue for ground green for signs … or what have you.

I used to work on automatic component test machines - the thing had a gadzilion reed relays that did all sorts of things depending on which of the maybe 12 different test modes/tests the thing could get into.  This was at the only way I could follow the thing if a fault showed up,  I had one schematic for each mode/test.

If anyone has or sees a Teradyne T-347 for sale, let me know.  (It might have my name inside.)

Roy




Roy Morgan
RoyMorgan at alum.mit.edu
K1LKY Since 1958