[Hammarlund] No Audio

[Bill Cromwell]

Hi Gary,

What about that receive/standby switch on the front panel? I don't 
remember if that is functional with the jumper in place around back. 
What about the antenna? Connected? Not shorted? Next thought would be 
the bandswitch contacts. Have you tried moving that? after That you'll 
probably have to open it up.

Do you know for sure the local oscillator and 2nd detector oscillator 
are running? Maybe the 6C4 went to lunch.

Just some ideas.

73,

Bill  KU8H

On 10/18/2014 09:19 PM, Gary H. Harmon, Jr. wrote:
> Before I dig deep into the bowels of this HQ-145 I thought I would ask if
> anyone has solved a similar problem.
>
>   
>
> I have no audio rush.
>
> I do have meter movement when turning the RF control or adjusting the rear
> pot.
>
> The relay jumper is in place.
>
> The tubes test OK and all are lit.
>
> I hear pops when switching the two toggle switches.
>
> I hear a little hum when touching one of the toggle switches.
>
>   
>
> Any thoughts?
>
>   
>
> Gary H. Harmon, Jr. - K5JWK - HAM Radio Archaeologist
>
> 6003 Archwood
>
> San Antonio, TX 78239-1504
>
> 210.657.1549h / 210.884.6926c/t
>
> gharmon (at) idworld.net
>
>   
>
> "Retirement = Every day is a Saturday except Sunday"
>
> http://www.grissomroadcoc.org
>