[Hammarlund] HXL-1 Capacitors

[Al Parker]

Hi John,
	Yes, those will work.  Manual calls for 100uf @450vdc, so they give a 
little margin.  Mouser.com also has some in stock, 10 at 450, for $3 to $4 
each.  Take a good look at what's available to figure out best mounting 
arrgt for what you get vs what's in there now.
	There are 470k voltage equalizing resistors shown, probably a good idea 
to include them again, even tho' electrlytics are built better these 
days and closer to spec.
	It's a nice amp, often underpriced just cuz it's not well known, but 
they've been OK for me.
73,

Al, W8UT
www.boatanchors.org
www.hammarlund.info

"There is nothing -- absolutely nothing -- half so much
worth doing as simply messing about in boats"
Ratty, to Mole

On 8/4/2014 2:09 PM, John Boyle wrote:
> I just picked up an HXL-1 in very good condition.  It’s working but still has the original electrolytic capacitors.  Any suggestions for replacement capacitors?
>
> CE Manufacturing has a can with dual 100 uF 500 VDC sections and the proper tab base.  Would 3 of these work?
>
> Thanks for your help.
>
> John Boyle   VE3PMA
> ______________________________________________________________
> Hammarlund mailing list
> Home: http://mailman.qth.net/mailman/listinfo/hammarlund
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Hammarlund at mailman.qth.net
>
> List Administrator: Duane Fischer, W8DBF
> ** For Assistance: dfischer at usol.com **
>
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>