[Hammarlund] WTB: Control shaft for clock on a HQ145 (Doug DeWeese)

[Paul Kraemer]

McMaster Carr has fibre rod and tube in multitude of sizes
Paul K0UYA
----- Original Message ----- 
From: "D C _Mac_ Macdonald" <k2gkk at hotmail.com>
To: <wf2q at aol.com>; "Hammarlund Mail List" <hammarlund at mailman.qth.net>; 
<ddswl at centurytel.net>
Sent: Tuesday, February 26, 2013 10:13 AM
Subject: Re: [Hammarlund] WTB: Control shaft for clock on a HQ145 (Doug 
DeWeese)


>
> 1/4" diameter fiber shafts are availble "somewhere"
> such as hobby shop.
>
> Drill (or have drilled) the correct size pilot hole for
> the thread on the clock shaft, cut to correct length,
> put a lock nut on the clock shaft, install the shaft,
> put case back on (carefully), install knob on shaft.
>
> * * * * * * * * * * *
> * 73 - Mac, K2GKK/5 *
> * (Since 30 Nov 53) *
> * k2gkk at hotmail.com *
> * Oklahoma City, OK *
> * USAF & FAA (Ret.) *
> * * * * * * * * * * *
>
>
>> To: hammarlund at mailman.qth.net
>> From: wf2q at aol.com
>> Date: Tue, 26 Feb 2013 09:42:55 -0500
>> Subject: Re: [Hammarlund] Hammarlund Digest, Vol 109, Issue 9
>>
>>
>> I made a clock control shaft for a HQ 170 from a dowel stick that I 
>> bought at Michaels for about 50 cents. I cut it to length, drilled a 
>> small hole for the clock shaft, tapered the external part and painted it 
>> grey. I secured it with a little epoxy (JB Weld). If you are a purist, 
>> this repair is not for you, but it worked fine for me.
>>
>> WF2Q
>>
>>
>> -----Original Message-----
>> From: hammarlund-request <hammarlund-request at mailman.qth.net>
>> To: hammarlund <hammarlund at mailman.qth.net>
>> Sent: Mon, Feb 25, 2013 12:00 pm
>> Subject: Hammarlund Digest, Vol 109, Issue 9
>>
>> Today's Topics:
>>
>> 1. FS;HQ100A Parts (Doug DeWeese)
>> 2. WTB: Control shaft for clock on a HQ145 (Doug DeWeese)
>>
>>
>> ----------------------------------------------------------------------
>>
>> Message: 2
>> Date: Sun, 24 Feb 2013 22:06:04 -0800
>> From: "Doug DeWeese" <ddswl at centurytel.net>
>> To: "Hammarlund" <hammarlund at mailman.qth.net>
>> Subject: [Hammarlund] WTB: Control shaft for clock on a HQ145
>> Message-ID: <D21A47FC20544653BAA9855F28728ACF at deweese>
>> Content-Type: text/plain; charset="iso-8859-1"
>>
>> Subject line sez it all, HQ170 & HQ180 will also work. If you can help, 
>> please
>> e-mail me dorect.
>> Tnx--Doug W7LNB ddswl at centurytel.net
>
> ______________________________________________________________
> Hammarlund mailing list
> Home: http://mailman.qth.net/mailman/listinfo/hammarlund
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Hammarlund at mailman.qth.net
>
> List Administrator: Duane Fischer, W8DBF
> ** For Assistance: dfischer at usol.com **
>
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html