[Hammarlund] SP-600 (Recapping Completed)

Carl km1h at jeremy.mv.com
Sun Jan 29 10:11:51 EST 2012


What, are you some sort of a nut case Gary? Nothing racist was meant or 
implied.

You best stick to what you do best which is buying and stripping radios to 
maximize profits.

Carl


----- Original Message ----- 
From: "Gary" <xfrmrs at roadrunner.com>
To: <hammarlund at mailman.qth.net>
Sent: Sunday, January 29, 2012 4:58 AM
Subject: Re: [Hammarlund] SP-600 (Recapping Completed)


> Carl, enough with your racists remarks.
> Gary
> ----------------------------------------------------
> ----- Original Message ----- 
> From: "Carl" <km1h at jeremy.mv.com>
> To: "Jim Wilhite" <w5jo at brightok.net>; <hammarlund at mailman.qth.net>
> Sent: Saturday, January 28, 2012 10:00 PM
> Subject: Re: [Hammarlund] SP-600 (Recapping Completed)
>
>
>>I thought General Cement (now GC Electronics) was the primary supplier of
>> those tools.
>>
>> I remember Philmore for often shoddy Jap components....now that really
>> dates
>> me....an entry level kits about 3 grades below anyone else. In the 80's
>> their components were the same as most any other importer, fairly decent
>> hobby grade.
>>
>> Datak did the dry transfers, PC board chemicals and similar. I still have
>> some of that stuff.
>>
>> Carl
>> KM1H
>>
>>
>>
>>
>> ----- Original Message ----- 
>> From: "Jim Wilhite" <w5jo at brightok.net>
>> To: <hammarlund at mailman.qth.net>
>> Sent: Saturday, January 28, 2012 9:24 PM
>> Subject: Re: [Hammarlund] SP-600 (Recapping Completed)
>>
>>
>>> Anyone old enough to remember Philmore?  Well it is now Philmore-datak,
>>> part of LKG industries.  They made most of the old alignment tools that
>>> old timers recall.  If you will go to this link you will find all sorts
>>> of alignment tools.
>>>
>>> http://www.philmore-datak.com/tool.html
>>>
>>> There are several pages of them and you can spend some time looking.
>>>
>>> Live it up,
>>>
>>> 73
>>>
>>> Jim/W5JO
>>>
>>>
>>> ----- Original Message ----- 
>>>
>>>
>>>
>>>> As to alignment, the IFs are no problem - any screwdriver will do.
>>>>
>>>>
>>>>
>>>> The RF alignment definitely requires a nonconductive, nonmagnetic
>>>> tool. The
>>>> Japanese make a wonderful ceramic screwdriver (sold through some US
>>>> distributors).
>>>> Unfortunately, it is too short to be of use in this application.
>>>>
>>>> I finally made do with a 1/4-inch plastic rod sharpened to a
>>>> screwdriver
>>>> blade at the end.
>>>>
>>>>
>>>>
>>>> The SP-600 -- as is -- has reasonably good audio on AM.
>>>>
>>>> The really worthwhile change is to add a product detector for CW and
>>>> SSB.
>>>>
>>>
>>> ______________________________________________________________
>>> Hammarlund mailing list
>>> Home: http://mailman.qth.net/mailman/listinfo/hammarlund
>>> Help: http://mailman.qth.net/mmfaq.htm
>>> Post: mailto:Hammarlund at mailman.qth.net
>>>
>>> List Administrator: Duane Fischer, W8DBF
>>> ** For Assistance: dfischer at usol.com **
>>>
>>>
>>> This list hosted by: http://www.qsl.net
>>> Please help support this email list: http://www.qsl.net/donate.html
>>>
>>>
>>> -----
>>> No virus found in this message.
>>> Checked by AVG - www.avg.com
>>> Version: 10.0.1416 / Virus Database: 2109/4773 - Release Date: 01/28/12
>>>
>>
>> ______________________________________________________________
>> Hammarlund mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/hammarlund
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Hammarlund at mailman.qth.net
>>
>> List Administrator: Duane Fischer, W8DBF
>> ** For Assistance: dfischer at usol.com **
>>
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>>
>
>
> ______________________________________________________________
> Hammarlund mailing list
> Home: http://mailman.qth.net/mailman/listinfo/hammarlund
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Hammarlund at mailman.qth.net
>
> List Administrator: Duane Fischer, W8DBF
> ** For Assistance: dfischer at usol.com **
>
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
>
> -----
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 10.0.1416 / Virus Database: 2109/4774 - Release Date: 01/29/12
> 



More information about the Hammarlund mailing list