[Hammarlund] HQ-129-X dial question

[Bill Stewart]

Richard,
Check the high end of the dials and you will find the p/n. You may be able to compare that with various parts lists.  Also, mine does not have 15 meters on the band spread dial. My s/n is 6315 if that means anything.
73, Bill K4JYS
----- Original Message -----
From: "Richard Knoppow" <1oldlens1 at ix.netcom.com>
To: hammarlund at mailman.qth.net
Sent: Wednesday, June 1, 2011 5:17:39 PM
Subject: [Hammarlund] HQ-129-X dial question

     Does anyone know if more than one set of frequency 
dials was used on the HQ-129-X. I am still trying to cure a 
problem where the dials show considerable error. This is NOT 
just the error to be expected in an older radio but 
something much more. The tuning capacitors seem to be 
completly intact so I am wondering if the dials were perhaps 
changed by some earlier owner perhaps because they had 
yellowed.
     I have something else to try but I thought I would ask 
about this since the RX seems to have had a number of 
production changes.


--
Richard Knoppow
Los Angeles
WB6KBL
dickburk at ix.netcom.com


______________________________________________________________
Hammarlund mailing list
Home: http://mailman.qth.net/mailman/listinfo/hammarlund
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Hammarlund at mailman.qth.net

List Administrator: Duane Fischer, W8DBF
** For Assistance: dfischer at usol.com ** 


This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html