[Hammarlund] HQ-129-X Question

[Bob Macklin]

The first step is to get the end points on the main tuning dial correct. On 
my NC-109 I finally used my counter to set the LO end points.

Once the end points on the main dial are set that's all you can do. There 
are no adjustments for the bandspread.

Bob Macklin
K5MYJ
Seattle, Wa.
"Real Radios Glow In The Dark"

----- Original Message ----- 
From: "Kenneth G. Gordon" <kgordon2006 at frontier.com>
To: "Richard Knoppow" <1oldlens1 at ix.netcom.com>
Cc: <Hammarlund at mailman.qth.net>
Sent: Sunday, November 28, 2010 4:40 PM
Subject: Re: [Hammarlund] HQ-129-X Question


> On 28 Nov 2010 at 16:21, Richard Knoppow wrote:
>
>> > BELOW signal frequency on the two highest bands.
>> >
>>
>>      Thank you very much. I am taking the thing back out of
>> its cabinet now to realign the top bands this way. It still
>> does not address the BS calibration on 80 and 40 but perhaps
>> I am expecting too much of it there.
>
> Well, I don't agree: I think there is some other problem which you have 
> not
> yet stumbled upon.
>
> But I am a "belt and suspenders" type: take care of the obvious problems
> first in order to clear the way to find the less obvious.
>
> A corollary to that is my other maxim: take care of the little problems 
> and
> generally the bigger problems will take care of themselves.
>
> Good luck.
>
> Ken W7EKB
> ______________________________________________________________
> Hammarlund mailing list
> Home: http://mailman.qth.net/mailman/listinfo/hammarlund
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Hammarlund at mailman.qth.net
>
> List Administrator: Duane Fischer, W8DBF
> ** For Assistance: dfischer at usol.com **
>
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>