[Hammarlund] SP 600 JLX Refurb

[Bill]

How do folks dispose of the oil/ uckity stuff ?

-----Original Message-----
From: hammarlund-bounces at mailman.qth.net
[mailto:hammarlund-bounces at mailman.qth.net] On Behalf Of Robert Nickels
Sent: Tuesday, July 27, 2010 8:39 PM
To: hammarlund at mailman.qth.net
Subject: Re: [Hammarlund] SP 600 JLX Refurb

On 7/27/2010 12:06 PM, Al Parker wrote:
> Hi Bill (&  Becky),
> 	I've done it both ways.  Take a look at my www.boatanchors.org site
and
> find 'SP-600 projects' near the top and take a look at some of my SP-600
> work.
>    

I've followed Al's suggestions with great results, and would defer to 
his judgment, but here's one slight deviation that worked for me.  Once 
you unsolder the bottom of the bathtub cans and removed the leaky 
uckumpucky innards and install new caps, there's no real reason to 
solder the darned lids back on.  The appearance is the same and the cans 
make for convenient mounting points to use the existing wiring.   Modern 
caps are so much smaller there's no problem fitting them inside.

73, Bob W9RAN

______________________________________________________________
Hammarlund mailing list
Home: http://mailman.qth.net/mailman/listinfo/hammarlund
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Hammarlund at mailman.qth.net

List Administrator: Duane Fischer, W8DBF
** For Assistance: dfischer at usol.com ** 


This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html