[Hammarlund] What do you think? SP-600 transmitter

[Tom NØJMY - AAR7FV]

Yeah, that's true, come to think of it.

73,
Tom
----- Original Message ----- 
From: "Todd, KA1KAQ" <ka1kaq at gmail.com>
To: "Tom NØJMY - AAR7FV" <tfarl at mchsi.com>
Cc: "GBrown" <gkbrown at gwi.net>; <hammarlund at mailman.qth.net>
Sent: Monday, June 20, 2005 11:38 AM
Subject: Re: [Hammarlund] What do you think? SP-600 transmitter


Not necessarily; Gary was very successful in plugging holes in the
panel of his current SP-600, then sanding smooth. Wouldn't be much of
a problem to cover the entire panel, then sand smooth and re-letter.
This way just kills two birds with one stone.

73, Todd  KA1KAQ

On 6/20/05, Tom NØJMY - AAR7FV <tfarl at mchsi.com> wrote:
> Need to do that anyway, as the lettering on the SP-600 is recessed.
>
> 73,
> Tom
> ----- Original Message -----
> From: "Todd, KA1KAQ" <ka1kaq at gmail.com>
> To: "GBrown" <gkbrown at gwi.net>
> Cc: <hammarlund at mailman.qth.net>
> Sent: Monday, June 20, 2005 10:25 AM
> Subject: Re: [Hammarlund] What do you think? SP-600 transmitter
>
>
> Gary -
>
> If you got a decent panel you could probably flip it and use the
> reverse side for lettering? This assumes you could use the current
> holes for existing controls. Would make it easier to deal with and
> also give you a reuseable front panel in a pinch, if you needed it.
>
> ~ Todd,  KA1KAQ
>
> On 6/18/05, GBrown <gkbrown at gwi.net> wrote:
> >
> >
> >
> > > WANTED:
> > > SP-600 front panel. Does not have to be good. Don't even care if
> > > there's
> > > extra holes. Would like the two dial trim pieces as well. Your all
> > wondering
> > > why.........well, I have never seen this done before so I am going
> > > to try
> > > and do a "first".
> > > After doing the restoration on a SP-600/JX-1, I have decided to
> > > build an
> > AM
> > > transmitter, using the front panel of an SP-600, 
> > > but...........only
> > > in
> > > reverse. I think this would be unique to see these sitting side by
> > > side in
> > > the ham shack. VFO/XTAL controlled, 100 watts, AM and CW.
> > > What's your thoughts?
> > > Regards,
> > > Gary...WZ1M
> > >
> >
> > _______________________________________________
> > List Administrator: Duane Fischer W8DBF
> > ** For Assistance: dfischer at usol.com **
> > ----
> > http://mailman.qth.net/mailman/listinfo/hammarlund
> >
> _______________________________________________
> List Administrator: Duane Fischer W8DBF
> ** For Assistance: dfischer at usol.com **
> ----
> http://mailman.qth.net/mailman/listinfo/hammarlund
>
>
>