[Hammarlund] sp-600

[Al Parker]

Dan,
    Get a manual and understand what it is you're touching.  Yes, that
"first L hole" is the oscillator section, it's probably the least of your
concerns at this point (unless you count from the back end, in which case
it's the antenna secn).
73,
Al
----- Original Message ----- 
From: "DAN COTSIRILOS" <dcsfree@worldnet.att.net>
To: "Al Parker" <anchor@ec.rr.com>; <hammarlund@mailman.qth.net>
Sent: Wednesday, February 04, 2004 4:56 PM
Subject: Re: [Hammarlund] sp-600


> I was just going to tweak up the coils and I noticed that touching I was
> something in the first L hole that made the signal go up about double!!!
> ----- Original Message ----- 
> From: "Al Parker" <anchor@ec.rr.com>
> To: "DAN COTSIRILOS" <dcsfree@worldnet.att.net>;
> <hammarlund@mailman.qth.net>
> Sent: Wednesday, February 04, 2004 2:32 PM
> Subject: Re: [Hammarlund] sp-600
>
>
> > Yes, it needs to be aliened correctly, like most of us :-)  and most
> > radios.  Incorrect alienization will void your warranty.
> > If you want some info on it, and the black beauties in it that are
> > probably degrading performance, take a look at The Hammarlund
Historian
> > website:
> > <http://www.hammarlund.info>
> >
> > 73,
> > Al, W8UT
> > New Bern, NC
> > BoatAnchors appreciated here
> > http://www.thecompendium.net/radio/
> > http://www.hammarlund.info
> >
> > ----- Original Message ----- 
> > From: "DAN COTSIRILOS" <dcsfree@worldnet.att.net>
> > To: <hammarlund@mailman.qth.net>
> > Sent: Wednesday, February 04, 2004 2:43 PM
> > Subject: [Hammarlund] sp-600
> >
> >
> > > I just got a sp-600 jx17. I also have a 51-j3. Is it normal that the
j3
> > is
> > > more sensitive on the Broadcast band? The j3 I have is fantastic and
bb
> > but
> > > I thought the sp-600 just as good?  It is supposed to aliened
correctly.
> > > Dan
> > >