[Hammarlund] Alignment of HQ129X

Tue, 20 Apr 2004 08:24:22 -0400

Sure it will work but make sure you check the manual first, one caveat is
the
antenna input unless it has been modified, is for 400 ohms (NOT 50 ohms) the
mismatch made cause different readings than called for in the manual, if you
signal
source is 50 ohms. The full manual may be found on the "BAMA" site and will
also
be quite helpful. Last word, careful not to overload the signals while doing
the IF
alignment as it is possible to tune to the wrong peak that way.
I have a pair of refurbished HQ-129X receivers, paired up with 1 BC-610(E)
and
1 BC-610(I) transmitters, all I can say is Smooth, real smooth!
Jim
WB2FCN
http://eshop1.chem.buffalo.edu

----- Original Message -----
From: <[email protected]>
To: <[email protected]>
Sent: Tuesday, April 20, 2004 4:22 AM
Subject: [Hammarlund] Alignment of HQ129X

> My HQ129x needs IF and RF alignment..Any tips on this will be much
> appreciated.I have the Sams Photofact,If I follow the procedure will I be
ok?..Tnx es
> 73's Ron W6MAU
>
>
> --- StripMime Report -- processed MIME parts ---
> multipart/alternative
>   text/plain (text body -- kept)
>   text/html
> The reason this message is shown is because the post was in HTML
> or had an attachment.  Attachments are not allowed.  To learn how
> to post in Plain-Text go to: http://www.expita.com/nomime.html  ---
> _______________________________________________
> List Administrator: Duane Fischer W8DBF
> ** For Assistance: [email protected] **
> ----
> http://mailman.qth.net/mailman/listinfo/hammarlund
>
>