[Hammarlund] sb600 hammarlund

[Al Parker]

Hi Gary,
    Take a look at The Hammarlund Historian website:
http://www.hammarlund.info
and go to the "service" section.  There you will see a very detailed
article by Ray Vasek, W2EC, on recapping the SP-600.  In it he covers what
types he used.  Hammarlund used all disc ceramics in the later SP-600's
(after abt s/n 17,500+-).  Earlier they had recommended using .01's in all
places where .01 & .022's were specified.
Al, W8UT
New Bern, NC
BoatAnchors appreciated here
http://www.thecompendium.net/radio/
http://www.hammarlund.info

----- Original Message ----- 
From: "G Bay" <botr8@yahoo.com>
To: <hammarlund@mailman.qth.net>
Sent: Tuesday, November 25, 2003 7:40 PM
Subject: [Hammarlund] sb600 hammarlund


>   Gentlemen,
>
> I just rescued the above unit from a garage where its
> been for abt 15 years. Am going to do a complete recaping
> and wonder if there are any suggestions on the type of cap.
> to use and should coupling caps be a different type from
> bypass ones. Also what do you recommend for a  voltage
> rating.
>
>  Thanks for any help and 73
>
> wb3dsj Gary
>
> PS. also need a ps. choke for a hq100 if anyone has a spare
> for sale :-)