[Hammarlund] Going to need 3.5MHz Xtal for SP600 JX17

Sat, 31 May 2003 23:55:01 -0400

Is 3.58 MHz (as in color burst frequency) close enough?

Those should be easily available.

Pat
wa4tuk

> -----Original Message-----
> From: [email protected]
> [mailto:[email protected]]On Behalf Of Phil Atchley
> Sent: Saturday, May 31, 2003 10:06 PM
> To: [email protected]
> Subject: [Hammarlund] Going to need 3.5MHz Xtal for SP600 JX17
>
>
> Hi.
> It looks like another JX17 along with an HC10 is going to find it's way to
> my QTH tomorrow afternoon (haven't had a SP600 for a couple years
> now).  The
> HC10 is supposed to be working FB, the JX17 will need some TLC to put
> operational. First order of the day is to find a replacement 3.5MHz 2nd
> mixer Xtal for the one that is missing from this unit.  2nd order
> of the day
> will be a complete re-cap/electrical overhaul of the unit.
>
> I've wanted an HC10 for some time so this will be a boon as I
> already have a
> couple receivers I'm planning on "tapping" the 455KHz IF on 8^)
>
> ANYHOO...  Anybody have an "extra" 3.5MHz Xtal, perhaps from a parts unit?
> How much do you need for it shipped to California (95348)?
>
> 73 de Phil, KO6BB
> DX begins at the noise floor!
> [email protected]
> Merced, California
> 37.18N  120.29W  CM97sh
>
>
>
> avast! (VPS 5/30/2003): the message contains no virus
> _______________________________________________
> List Administrator: Duane Fischer W8DBF
> ** For Assistance: [email protected] **
> ----
> http://mailman.qth.net/mailman/listinfo/hammarlund
>